InvariBold™ 40 is a directional, linear ribbed titanium finish designed for use in architectural applications. Its moderate reflectivity lends itself to a variety of applications, including wall panels, coping and trim. Since InvariBold™ 40 has no coatings to deteriorate, it will last indefinitely with little maintenance.



Grade Selection
Optimal performance of InvariBold™ 40 is assured by its highly engineered properties, which appear in Table I. Grade 2 is appropriate for most applications. Other grades may be considered where design parameters such as wind resistance require elevated mechanical properties. It should be noted that grades with higher mechanical properties will be somewhat more difficult to fabricate. For most applications, Grade 2 offers a practical balance between formability and strength. InvariBold™ 40 is at home in severe environments, such as seacoast atmospheres subjected to salt water spray.

Pounds Per Piece
Thickness (in.) x Width (in.) x Length (in.) x .163

Available Sizes
Coils and cut lengths up to 288" are available.

Typical Surface Characteristics
Width of rib cycle (tooth and groove) .......................................  .04"
Depth of rib pattern ......................................................................   .001"

Fire Resistance
Titanium is a high melting point alloy which will provide superior resistance to fire damage than lower melting point alloys and combustible materials.

Flatness
InvariBold™ 40 is supplied to ASTM standard commercial allowances.


> Click here to download a complete Data Sheet for this product, which includes all of the above text, PLUS additional Fabrication, Installation, Maintenance, Environmental Impact, Warranty information and more!